# boot conditions (recorded with the capture) # generated: 2026-09-24T23:36-07:00 (capture written from the run's console log) # what: IRIX 6.5.30 on the two-processor Origin 300 with the R14000 # performance event-select fix, kept running about 28 minutes after # launch, about 18 of them at the login prompt. The PROM reports ALL # DIAGS PASSED and IRIX reaches login; the secondary-cache # single-bit-error warning never appears. # machine: -M origin300 -cpu R14000 -smp 2 -m 512 via tools/origami run irix # --machine origin300 --no-build; option 1 typed at the PROM menu. # Firmware assets/firmware/6.5.30/ip35prom.payload.bin (IP35 PROM # 6.210). # disk: assets/irix/6.5.30/root-diags-origin300.qcow2 (sha256 # 150cf2c125cb..., the manifest-registered disk), booted from a # writable reflink copy in scratch storage. # source: QEMU 3684d90ed2 ("target/mips: keep the R14000 performance event # select" on 5161caff65), build-fast. The pull request carries the # same change rebased as 8e52cd5dc3. Origami e09edbef40. # host: load average 120 to 160 during the run on 32 processors, with the # four-processor boot beside it. # note: run irix-20260925T060806-e1ac8f. # ----------------------------------------------------------------------------- INFO: 001c01 powering up the system. 001c01-L1> entering console mode 001c01 CPU0, to escape to L1 Starting PROM Boot process IP35 PROM SGI Version 6.210 built 02:33:51 PM Aug 26, 2004 using BaseIO nic Testing/Initializing memory ............... *** Swapping bank 0 with bank 2 on module 001c01 (nasid 0) *** All other banks on the node are remapped as well. DONE Copying PROM code to memory ............... DONE Discovering local IO ...................... DONE Discovering NUMAlink connectivity ......... Local hub NUMAlink is down. *** Local network link down DONE Found 1 objects (1 hubs, 0 routers) in 907 usec Waiting for peers to complete discovery.... DONE No other nodes present; becoming global master Global master is /hw/rack/001/bay/01 Intializing any CPUless nodes.............. DONE Checking partitioning information ......... DONE No other nodes present; becoming partition master Local slave entering slave loop Loading BASEIO prom ....................... DONE BASEIO PROM Monitor SGI Version 6.210 built 02:30:38 PM Aug 26, 2004 (BE64) 2 CPUs on 1 nodes found. NVRAM checksum is incorrect: reinitializing. Automatic update of PROM environment disabled Installing PROM Device drivers ............ enet_phy_reg : Warning - PHY Silicon Revision Register value 0x0000 is not supported for IO7 by this diag! enet_phy_reg : Warning - unexpected Reg 1 reset value exp: 0x7849 mask: 0xffc9 got: 0x9200000000007809 enet_phy_reg : Warning - unexpected Reg 6 reset value exp: 0x0004 mask: 0xffe4 got: 0x9200000000000000 enet_phy_reg : Warning - unexpected Reg 23 reset value exp: 0x0000 mask: 0xffff got: 0x9200000000008040 enet_phy_reg : Warning - unexpected Reg 24 reset value exp: 0x0000 mask: 0xc77f got: 0x9200000000008020 Base I/O Ethernet set to /dev/ethernet/ef0 Walking SCSI Adapter 0, (pci id 1) 1+ Device Vendor Product: QEMU QEMU HARDDISK 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 1 device(s) Walking SCSI Adapter 1, (pci id 1) 1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s) Initializing PROM Device drivers .......... DONE Checking hardware inventory ............... WARNING: hardware inventory is invalid. Reinitializing... Writing 3 records... DONE Updated new configuration. Wrote 3 records. **** System Configuration and Diagnostics Summary **** CONFIG: No. of NODEs enabled = 1 No. of NODEs disabled = 0 No. of CPUs enabled = 2 No. of CPUs disabled = 0 Mem enabled = 512 MB Mem disabled = 0 MB No. of RTRs enabled = 0 No. of RTRs disabled = 0 DIAG RESULTS: ALL DIAGS PASSED. **** End System Configuration and Diagnostics Summary **** System Maintenance Menu 1) Start System 2) Install System Software 3) Run Diagnostics 4) Recover System 5) Enter Command Monitor Option? 1 Starting up the system... IRIX Release 6.5 IP35 Version 07202013 System V - 64 Bit Copyright 1987-2006 Silicon Graphics, Inc. All Rights Reserved. NOTICE: pcibr_attach: /hw/module/001c01/Ibrick/xtalk/15/pci Bus holds a usb part - settingbridge PCI_RETRY_HLD to 4 Setting hub ixtt.rrsp_ps field to 0x4e20 Selecting Default Server NOTICE: Starting failsoftd The system is coming up. /ns: Resource busy Warning: Internet Gateway web server running as root. Use "chkconfig webface_apache off" to disable. ESP has already been started IRIS console login: