winterm — IRIX 6.5.30 across two Origin 300 chassis, eight processors
IRIX 6.5.30 across two Origin 300 chassis, eight processors
# boot conditions (recorded with the capture)
# guest: IRIX 6.5.30 installed on the Origin 300 disk
# root-diags-work.qcow2 (the one-chassis field-diagnostics
# disk, a fresh private reflink copy), booted on the
# two-chassis Origin 300 from the PROM System Maintenance Menu,
# option 1 (Start System), then, after the login prompt, three
# command lines through a root login: hinv, a listing of
# /hw/module and its modules, and mpadmin -s; the processor-bus
# listing under each module's node and hinv -c memory; and the
# slices under each processor bus. This is the master chassis's
# L1 console (module 001c01).
# command: tools/origami run irix --machine origin300
# --topology origin300-two-chassis, eight processors,
# --disk <copy of root-diags-work.qcow2>
# --src <QEMU worktree> --no-build --background, then
# tools/origami guest run for the command lines
# (run irix-20260926T031100-37233c)
# machine: as irix.boot.2026-09-25T18:16:39-07:00: -accel tcg,thread=multi
# -M origin300,topology=origin300-two-chassis with each chassis's
# identity records, -cpu R14000 -smp 8 -m 1024, one writable
# boot flash per chassis seeded for four processors.
# firmware: stock IP35 PROM 6.210 (assets/firmware/6.5.30/
# ip35prom.payload.bin).
# qemu: branch sgi-origami-o300-led-decode-v2 f8b5b2a491, on trunk
# 27ab90efba: QEMU change 837, which landed as 893f2d3778 on a
# later trunk whose other changes are unrelated; build-fast,
# qemu-system-mips64 SHA-256
# c31ea4adde5c7de213a03d1ec91eb288f9fe6382c68df1702de465f3ba9d0f5c
# origami: tools/ tree 06e0a2869fe6b1db0d0813848545189b28486929
# (Origami main at 251796ad01).
# unknowns: host load average was about 100 to 200; timing in this
# capture means nothing. The mpadmin line's exit status (8)
# was reported by the harness and is not investigated.
#
INFO: 001c01 powering up the system.
001c01-L1>
entering console mode 001c01 CPU0, <CTRL_T> to escape to L1
Starting PROM Boot process
IP35 PROM SGI Version 6.210 built 02:33:51 PM Aug 26, 2004
using BaseIO nic
Testing/Initializing memory ............... *** Swapping bank 0 with bank 2 on module 001c01 (nasid 0)
*** All other banks on the node are remapped as well.
DONE
Copying PROM code to memory ............... DONE
Discovering local IO ...................... DONE
Discovering NUMAlink connectivity ......... DONE
Found 2 objects (2 hubs, 0 routers) in 150753 usec
Waiting for peers to complete discovery.... DONE
Global master is /hw/rack/001/bay/01
Intializing any CPUless nodes.............. DONE
Checking partitioning information ......... DONE
Local slave entering slave loop
Loading BASEIO prom ....................... Local slave entering slave loop
Local slave entering slave loop
DONE
BASEIO PROM Monitor SGI Version 6.210 built 02:30:38 PM Aug 26, 2004 (BE64)
8 CPUs on 2 nodes found.
NVRAM checksum is incorrect: reinitializing.
Automatic update of PROM environment disabled
Installing PROM Device drivers ............
enet_phy_reg : Warning - PHY Silicon Revision Register value 0x0000
is not supported for IO7 by this diag!
enet_phy_reg : Warning - unexpected Reg 1 reset value
exp: 0x7849
mask: 0xffc9
got: 0x9200000000007809
enet_phy_reg : Warning - unexpected Reg 6 reset value
exp: 0x0004
mask: 0xffe4
got: 0x9200000000000000
enet_phy_reg : Warning - unexpected Reg 23 reset value
exp: 0x0000
mask: 0xffff
got: 0x9200000000008040
enet_phy_reg : Warning - unexpected Reg 24 reset value
exp: 0x0000
mask: 0xc77f
got: 0x9200000000008020
Base I/O Ethernet set to /dev/ethernet/ef0
Walking SCSI Adapter 0, (pci id 1)
1+ Device Vendor Product: QEMU QEMU HARDDISK
2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 1 device(s)
Walking SCSI Adapter 1, (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)
Initializing PROM Device drivers .......... DONE
Checking hardware inventory ...............
WARNING: hardware inventory is invalid. Reinitializing...
Writing 6 records...... DONE
Updated new configuration. Wrote 6 records.
**** System Configuration and Diagnostics Summary ****
CONFIG:
No. of NODEs enabled = 2
No. of NODEs disabled = 0
No. of CPUs enabled = 8
No. of CPUs disabled = 0
Mem enabled = 1024 MB
Mem disabled = 0 MB
No. of RTRs enabled = 0
No. of RTRs disabled = 0
DIAG RESULTS:
ALL DIAGS PASSED.
**** End System Configuration and Diagnostics Summary ****
System Maintenance Menu
1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor
Option? 1
Starting up the system...
IRIX Release 6.5 IP35 Version 07202013 System V - 64 Bit
Copyright 1987-2006 Silicon Graphics, Inc.
All Rights Reserved.
NOTICE: pcibr_attach: /hw/module/001c02/Ibrick/xtalk/15/pci Bus holds a usb part - settingbridge PCI_RETRY_HLD to 4
Setting hub ixtt.rrsp_ps field to 0x4e20
NOTICE: pcibr_attach: /hw/module/001c01/Ibrick/xtalk/15/pci Bus holds a usb part - settingbridge PCI_RETRY_HLD to 4
Setting hub ixtt.rrsp_ps field to 0x4e20
Selecting Default Server
NOTICE: Starting failsoftd
The system is coming up.
network: WARNING: Failed to configure ef1 as gate-IRIS.
Warning: Internet Gateway web server running as root.
Use "chkconfig webface_apache off" to disable.
ESP has already been started
IRIS console login:
IRIS console login: root
IRIX Release 6.5 IP35 IRIS
Copyright 1987-2006 Silicon Graphics, Inc. All Rights Reserved.
Last login: Tue Sep 17 23:35:25 PDT 2024 on ttyd1
TERM = (vt100)
IRIS 1# exec /bin/sh
# PS1='ORIGAMI''sh> '; export PS1; PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/etc:/usr/bsd:$PATH; export PATH
ORIGAMIsh> echo "__OB_""d52e92d7__"; hinv; echo ===; ls /hw/module; echo ===; ls /hw/module/*; echo ===; mpadmin -s; s=$?; echo "__OE_""d52e92d7__=${s}__"
__OB_d52e92d7__
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
Processor 0: 500 MHZ IP35
Processor 1: 500 MHZ IP35
Processor 2: 500 MHZ IP35
Processor 3: 500 MHZ IP35
Processor 4: 500 MHZ IP35
Processor 5: 500 MHZ IP35
Processor 6: 500 MHZ IP35
Processor 7: 500 MHZ IP35
Main memory size: 1024 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 6: Version QL12160, single ended
Integral SCSI controller 7: Version QL12160, single ended
Integral SCSI controller 0: Version QL12160, single ended
Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 1: Version QL12160, single ended
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
Fast Ethernet: ef1, version 1, module 001c02, pci 4
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
IOC3/IOC4 external interrupts: 2
IOC3/IOC4 external interrupts: 1
USB controller: type OHCI
USB controller: type OHCI
===
001c01 001c02
===
/hw/module/001c01:
Ibrick L1 node slab
/hw/module/001c02:
Ibrick L1 node slab
===
processors: 0 1 2 3 4 5 6 7
unrestricted: 0 1 2 3 4 5 6 7
restricted:
isolated:
excluded:
preemptive: 0 1 2 3 4 5 6 7
nointr:
clock: 0
fast clock: 0
warded:
__OE_d52e92d7__=8__
ORIGAMIsh>
ORIGAMIsh> echo "__OB_""bcfb08dd__"; ls -l /hw/module/001c01/node/cpubus /hw/module/001c02/node/cpubus; hinv -c memory; s=$?; echo "__OE_""bcfb08dd__=${s}__"
__OB_bcfb08dd__
/hw/module/001c01/node/cpubus:
total 0
drwxr-xr-x 2 root sys 0 Sep 25 20:28 0
drwxr-xr-x 2 root sys 0 Sep 25 20:28 1
/hw/module/001c02/node/cpubus:
total 0
drwxr-xr-x 2 root sys 0 Sep 25 20:28 0
drwxr-xr-x 2 root sys 0 Sep 25 20:28 1
Main memory size: 1024 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
__OE_bcfb08dd__=0__
ORIGAMIsh>
ORIGAMIsh> echo "__OB_""32495d38__"; ls /hw/module/001c01/node/cpubus/0 /hw/module/001c01/node/cpubus/1 /hw/module/001c02/node/cpubus/0 /hw/module/001c02/node/cpubus/1; s=$?; echo "__OE_""32495d38__=${s}__"
__OB_32495d38__
/hw/module/001c01/node/cpubus/0:
a b
/hw/module/001c01/node/cpubus/1:
a b
/hw/module/001c02/node/cpubus/0:
a b
/hw/module/001c02/node/cpubus/1:
a b
__OE_32495d38__=0__
ORIGAMIsh>
# Boot transcripts are excluded from the site content license. · raw: origin300-irix-two-chassis-boot.txt